Glass and rearview mirror adhesive 8g techniqll

Glass and rearview mirror adhesive 8g techniqll - description

Instant cyanoacrylate glue - has the highest parameters of technical glue for a permanent, invisible bonding of glass, crystal, and gemstones with various materials both hard and flexible. The included rubber patch serves as a connector between the glass surface and the metal part of the mirror holder, eliminates irregularities, and absorbs vibrations. In the case of this type of connection, the evenly applied glue film with a brush ensures uniform distribution of adhesive forces during tensile stress, which guarantees a correct and durable repair. Features:

- packaging with a brush
- flexible glue
- bonds instantly (in seconds)
- included rubber patch

Benefits:

- precise application of glue, low glue consumption
- ability to bond materials with different properties
- short repair time
- ability to make flexible connections

Application:
Designed for gluing: glass, metal, rubber, wood, hard plastics, etc. (except for PE, PP, and Teflon). Bonds hard and flexible materials. Also used for bonding material combinations “metal + rubber, plastics + rubber, paper + plywood + glass, etc.” Bonding of O-ring type seals. Used for attaching the base of the mirror to car windows. Also essential in jewelry and optics.
Parameters:

- Viscosity: 80 cP (mPas)
- Shear strength: 3.0 MPa
- Max. gap to fill: 0.10 mm
- Temperature range: -55C to 80C
- Shelf life: 12 months

Method of use:

- Mark exactly on the glass the point of connection for the mirror (during gluing, correction is not recommended).
- Remove the mirror from the holder.
- On the metal surface of the holder to be bonded, apply with a brush an even, as thin as possible layer of glue.
- Place the degreased rubber patch (connector) on a smooth, level, horizontal surface, e.g. a table and press the mirror holder onto it. Hold with uniform pressure for about 10 seconds.
- Cut off excess rubber with a knife to the size of the base of the holder.
- On the glued rubber surface of the holder, apply with a brush a second even, thin layer of glue.
- With a decisive motion, without shifting and with uniform pressure, press the holder against the car glass holding it for the next 20-30 seconds.
- After about 1 hour, attach the mirror to the holder.

---

Payment options

• Bank transfer

---

Delivery options

• National delivery
• International delivery

---

Shipping to countries