Gas sensor detector xg20 230v

Gas sensor detector xg20 230v - description

The gas sensor is a reliable device that will help protect you and your family from fire. Equipped with an advanced gas detection system, the device ensures early detection of failures, allowing for quick response. It is designed to monitor enclosed spaces for the presence of combustible gases: methane, ethane, and propane, butane.
Installation site selection
To ensure maximum level of protection, it is recommended to install the device in all rooms and on each level of the residential building (both where appliances or installations that may pose potential fire hazards are present, and in other rooms).
At the moment of alarm activation, one should:

- ABSOLUTELY LEAVE THE SMOKED ROOM IN WHICH THE ALARM WAS ACTIVATED
- If possible, open windows and doors to provide ventilation to the room
- Report the problem to specialized units (fire brigade, gas emergency services)
- In case of observing any symptoms of poisoning (e.g., headache) in yourself or any other household member, contact a doctor immediately

Visual and auditory signaling depending on the device status

- Device activation and warming up: LEDs blink in a green/red/yellow cycle | Single sound signal
- End of startup / Normal operation: Indicator shines green | No sound signal
- Alarm: Indicator flashes red (2.5 Hz) | Audible signal is emitted
- Sensor error: Indicator shines yellow | No sound signal
- Alarm - test: LEDs blink in a green/red/yellow cycle | Audible signal is emitted
- End of product life: Indicator flashes yellow | Audible signal emitted once per minute

Device’s shelf life
The average shelf life of the device (electronic sensor) is up to 10 years. This period is strictly dependent on the environmental conditions in which the device operated, production date, number of alarm activations, etc. It is recommended to regularly replace worn-out models with new devices.
Specifications:

- Power supply: AC 230V / 50 Hz
- Device type: B
- Standby power consumption: 70dB/1m
- Alarm output: relay (NC / NO)
- Control output: control valve output 12V
- Acceptable operating temperature: -10°C ~ 50°C
- Acceptable humidity: 10% ~ 90% R.H.

---

Payment options

• Bank transfer

---

Delivery options

• National delivery
• International delivery

---

Shipping to countries