4x Mounting Adhesive Pattex One4All Crystal 290g Skeleton Squeezer

4x Mounting Adhesive Pattex One4All Crystal 290g Skeleton Squeezer - description

Set of 4x Pattex ONE FOR ALL Crystal Adhesive + Squeezer is a high-quality universal polymer adhesive and sealant, based on the "Flextec polymer" technology. It is characterized by crystal transparency. It is designed for all kinds of materials and surfaces, in all conditions. Pattex ONE FOR ALL Crystal glues and seals indoor and outdoor components made of absorbent and non-absorbent materials.

Product advantages: crystal clear, universal adhesive, polymer sealant, Flextec Polymer technology - patented by Henkel, guaranteeing excellent bonding and sealing results for all types of surfaces (absorbent and non-absorbent) thanks to its exceptional resistance to vibration, vibration and external conditions, for almost all materials, for absorbent and non-absorbent materials, for interior and exterior, for adhesive even damp and wet surfaces, weatherproof and UV-resistant, waterproof, no shrinkage, high elasticity, shock-resistant, can be painted.

Possible applications:WoodBrickConcreteCeramicsStoneMetalGlassMirrorsPolystyrenePlasterboardsDry and damp surfacesPlastic**Not suitable for bonding PE, PP, PTFE, acrylic glass, copper, brass and soft PVC.

CARTRIDGE SQUEEZERThe tear and durable squeezer for masses and glues. It will be perfect as a complement to your construction assortment. Designed for assembly work in construction, technical installations and mechanical services.

GLUING METHOD:1. Thoroughly clean the surfaces to be bonded from dust, grease, oil, bitumen, rust and residual water and other substances that reduce the adhesion of the adhesive. The adhesive can be applied to damp surfaces, while the surfaces to be bonded should not be exposed to constant water. If the ground has unevenness, it should be leveled. The substrate must be stable. If necessary, protect the adjacent surfaces with paper tape before application.2. Cut off the end of the cartridge just above the thread. The dispensing tip should be cut at an angle. Place the cartridge in a special gun.3. Apply the adhesive in lines or spots to the substrate or the material to be glued. Do not apply the adhesive directly to the edges. For wide surfaces, the adhesive should be applied "wavy" to increase initial adhesion. For external use, the vertical line marking technique should be used. In the case of gluing two elements with non-absorbent surfaces, the applied adhesive must not be completely cut off from air access.4. Glue until the glue is moist (approx. 10 min). After the object is properly positioned, it should be pressed firmly to obtain a proper binding.5. In the case of sealing, the surface of Pattex ONE FOR ALL Crystal should be smoothed with a tool moistened in an aqueous soap solution. Do not use for structural expansion joints.6. Fresh dirt should be cleaned immediately after application with a dry cloth and then with acetone or white spirit. The hardened material can only be removed mechanically.7. Depending on the surfaces on which the elements are glued, it may be necessary to support heavy objects for min. 24 hours.

---

Payment options

• Bank transfer

---

Delivery options

• Collection in person
• National delivery
• International delivery

---

Shipping to countries